WELD-ON P-68™ PRIMER PURPLE (Pint)
IPS Weld-On P-68 Purple Primer
One Pint Can
GENERAL DESCRIPTION:
WELD-ON® P-68™ is a low VOC emission, non-bodied, fast acting, primer. The strong action of P-68 primer rapidly softens and
dissolves the joining surfaces of PVC and CPVC pipe and fittings. Available in clear and purple; the latter allows easy identification when used on the joining surfaces.
APPLICATION:
WELD-ON P-68 primer, when used in conjunction with appropriate WELD-ON solvent cements, will make consistently strong, wellfused joints. It is essential that the joining surfaces of pipe and fittings be softened and remains softened prior to assembly. The main function of the primer is to expedite the penetration and softening of the surfaces. Its rate of penetration into the joining surfaces is more rapid than that of solvent cement alone. P-68 primer is suitable for use with all types, classes and schedules of PVC and CPVC pipe and fittings. Detailed directions on making solvent cemented joints are printed on the container label. An installation DVD/CD covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructions supplied by the pipe and fitting manufacturer.
NOTE: WELD-ON solvent cements must never be used in a CPVC system using or being tested by compressed air or gases; including air-over-water booster.
AVAILABILITY:
WELD-ON Both WELD-ON P-68 clear and purple primers are available in ¼ pint (118 ml), ½ pint (237 ml), pint (473 ml), quart (946 ml) and gallon (3.785 l) metal cans.
SPECIFICATIONS:
COLOR: Clear or Purple
SPECIFIC GRAVITY: 0.841 ± 0.040
BROOKFIELD VISCOSITY: Water Thin
SHELF LIFE:
3 years in tightly sealed containers. The date code of manufacture is stamped on the bottom of the container. Stability of the product is limited by the evaporation of the solvent when the container is opened. Adding of solvents is not recommended and may significantly change the properties of the primer.
QUALITY ASSURANCE:
WELD-ON P-68 primer is carefully evaluated to assure that consistent high quality is maintained. Fourier transform infrared spectroscopy, gas chromatography, and additional in depth testing ensures each batch is manufactured to exacting standards. A batch identification code is stamped on each can and assures traceability of all materials and processes used in manufacturing this product.
SAFETY AND ENVIRONMENTAL PRECAUTIONS:
This product is flammable and considered a hazardous material. In conformance with the Federal Hazardous Substances Labeling Act, the following hazards and precautions are given. Purchasers who repackage this product must also conform to all local, state and federal labeling, safety and other regulations. VOC emissions do not exceed 550 grams per liter.
SPECIAL PRECAUTION:
Do not use a dry granular calcium hypochlorite as a disinfecting material for water purification in potable water piping systems. The introduction of granules or pellets of calcium hypochlorite with PVC and CPVC solvent cements and primers (including their vapors) may result in a violent chemical reaction if a water solution is not used. It is advisable to purify lines by pumping chlorinated water into the piping system – this solution will be nonvolatile. Furthermore, dry granular calcium hypochlorite should not be stored or used near solvent cements and primers.
IMPORTANT NOTE:
This product is intended for use by skilled individuals at their own risk. These suggestions and data are based on information we believe to be reliable. Installers should verify for themselves that they can make satisfactory joints under varying conditions. Toward this end, it is highly desirable that they receive personal instruction from trained instructors or competent, experienced installers. Contact IPS® Corporation or your supplier for additional information or instructions.
