Hunter XC Hybrid Irrigation Controllers
Water Management via DC Power

XCH-400 Indoor / Outdoor 4-Station Controller
 

Forget following that winding trail to find an accessible outlet. Hunter Industries’ new XC Hybrid Controller brings you the power without the plug. With all the great water management features of the XC Controller, the new XC Hybrid operates DC latching solenoids with battery power. Ready for outdoor or indoor installation, the XC Hybrid comes in 4, 6, 8, 10 and 12 station models, meaning it is your solution for a wide range of residential and commercial applications. Small residential areas, parks, gardens, roadway medians and roundabouts are ready for the XC Hybrid. Presenting Hunter. Unplugged.

Find advance water management control at your fingertips. Compact, user-friendly and battery powered, the XC Hybrid is proof big things come in small packages. Features such as a 365 day calendar, three independent programs (each with four start times), global seasonal adjustment and station-controlled sensors mean saving a little blue and a lot of green. And we’ve got you covered: With ‘Easy Retrieve’ memory backup and on-board, non-volatile memory, you’ve got the assurance to recall all the controller’s watering programs. Did we put the XC in ‘excellence’? You’ll think so.

Features:

• 3 programs, A, B, C
• Automated chronological ordering of start times/start time stacking
• One-button manual start and advance
• Electronic short circuit detection
• Programmable delay between stations
• AM/PM or 24 hour clock option
• Rain sensor bypass switch compatible with micro-switch based sensors, displays when sensor is active
• Programmable sensor input by station
• Easy Retrieve Memory - original program can be saved in non-volatile memory and retrieved later if needed
• Programmable rain delay from 1 to 7 days
• Programmable event day off allows specific day(s) to be designated as always “off”
• Hunter Quick Check™ helps troubleshoot field wiring issues
• Test program feature allows for quick system checks
• UL Listed/CE Approved

Specifications:

• Power Source: 6 AA batteries (XCH), 6 C batteries (XCH Stainless), or 24 VAC (optional)
• Operates DC Latching Solenoids only (p/n 458200)
• Start times: 4 per day, per program for up to 12 daily starts
• Station run time: 0 minutes to 4 hours in 1-minute increments
• Day schedule: 7-day calendar true odd/even programming with 365-day calendar clock, or interval watering (up to 31 days)
• Seasonal adjust: 0% to 150%
• Transformer input: 120 VAC, 60 Hz (domestic model)
• Transformer output: 24 VAC, 1.0 A (capable of operating equivalent of 3 solenoids simultaneously)
• Station output: 0.56 A

Dimensions

• 8-5/8” H x 7” W x 3-3/4” D

Models

• XCH-400 – 4-station indoor/outdoor controller
• XCH-600 – 6-station indoor/outdoor controller
• XCH-800 – 8-station indoor/outdoor controller
• XCH-1000 – 10-station indoor/outdoor controller
• XCH-1200 – 12-station indoor/outdoor controller
• XCH-600-SS – 6-station indoor/outdoor controller, stainless
• XCH-1200-SS – 12-station indoor/outdoor controller, stainless